Applications of Robotics in Welding

Tanveer Majeed, Mohd Atif Wahid, Faizan Ali

Abstract


An Industrial robot is reprogrammable, automatically controlled, multifunctional manipulator programmable in three or more axes, which may be either fixed in place or mobile for use in industrial automation applications. Technical innovations in robotic welding has facilitated manual welding processes in sever working conditions with enormous heat and fumes to be replaced with robotic welding. The robotic welding has greater capability to control robot motion, welding parameters and enhanced wrong detection and wrong correction. Major difficulties in robotic welding are joint edge inspection, weld penetration control, seam tracking of joints, and width or profile measurement of a joint. These problems can be more easily solved by use of sensory feedback signals from weld joint.  Robotic welding system has intelligent and effective control system that can track the joint, monitor the joint in process and accounts for variation in joint location. Sensors play an important role in robotic welding systems with adaptive and intelligent control system features that can track the joint, account for variation in joint location and geometry monitor in-process quality of the weld. In this paper various aspects of robotic welding, robot programming, and problems associated with robot welding are undertaken.

Full Text:

PDF

References


Laiping, C.Shanben and L. Tao, “The modeling of welding pool surface reflectance of aluminum alloy pulse GTAW,” Materials Science and Engineering: A, vol. 394, no. 1–2, p. A 320–326, 2005.

Pires, JN, Loureiro, A, Godinho T, Ferreira P, Fernando B, Morgado J, 2003.“Welding robots,” IEEE Robotics & Automation Magazine, pp.45–55, 2003.

Cui H, Dong J, Hou G, Xiao, Z, Chen, Y, & Zhao, Z.“Analysis on arc welding robot visual control tracking system”, in 2013 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering (QR2MSE).

Pires, J. Norberto, “Welding robots: technology, systems issues and applications”. Springer-Verlag London Limited , 2006.

Cary H B and Helzer S C, Modern Welding Technology, Upper Saddle River, Pearson Education, New Jersey, 2005.

McWhirterK.“Weldingrobotprogrammability,”WolfRobotics,24,January,2012.[Online].Available: http://www.cimindustry.com/article/welding/weldingrobot– programmability. [Accessed:14 July 2015].

Miller Electric Mfg Co., “Offline programming and simulation in robotic welding applications speeds up programming time, reduces robot downtime,” 2013.

Bolmsjö G & Olsson, M. Sensors in robotic arc welding to support small series production. Industrial Robot: An International Journal, 32(4), 341–345, 2005.

Dinham, M, & Fang, G. Autonomous weld seam identification and localisation using eye in hand stereo vision for robotic arc welding. Robotics and Computer-Integrated Manufacturing, 29(5), 288–301,2013.

Rochelle B. “Think before you integrate (robotic welding),” thefabricator.com, 1 March 2010

Robotics Bible, “Arc welding robot,” 11 September 2011.[Online].Available:http://www.roboticsbible.com/arc-welding-robot.html [Accessed 12 May 2013].




DOI: https://doi.org/10.23956/ijermt.v7i3.9

Refbacks

  • There are currently no refbacks.